Frequency Counter SF-401 PLUS SURECOM Portable CTCSS/DCS Decoder
Introduction:
Feature & Specification:
Power On/Off
Power On –Press and Hold down the [black key] by 2 second Power Off –Press and Hold down the [black key] by 4 second of number count down to 0 Charging the battery Plug the Power cord into adaptor , Micro USB connected SF-401, The Led indicating: *The RED Led is light - Charging * The Green Led is light - Full How to check Frequency measuring. See PIC.3
The transmitter near the frequency counter antenna , see the signal reception conditions is zone green, you can test. Please see Pic.3
cautions: e.g. display 1800.000Mhz , The transmitter distance is too close to the frequency counter will affect the test results, , the signal bar is red .(see Pic.1) e.g. display 0.000, , The transmitter distance is too far to the frequency counter and signal is weak ,will affect the test results, the signal bar is low .(see Pic.1) ! Note: (27MHz to 100MHz It can not be guaranteed and the corresponding normal emission appliance) .
How to check Frequency of Digital DMR Radio
Press[ F3 Digital] from Measuring screen mode See PIC.1 Note: Use Digital mode have 3 Decimal only
MENU funtion setting and save. See PIC.4
Press [F1] > into menu Page Press [F3 down] or [F4 Up] into System and Press [F2 Rtn] into system Page PIC.4 Press[F3 down] or [F4 Up] select funtion ,Press [F2 Edit] > [F3 - ][F4 +] change mode Press[Menu] > [F1 ]to Exit or [F4 ] to Save and Exit
How to check CTCSS/DCS code
1.Radio must be 136-174/400-520MHz 2.Radio must be ANALOG CTCSS/DCS Decoder for ANALOG mode
CDCSS for ANALOG mode (N code only)
Package Contents
1x SF401 PLUS Frequency Counter
|
留言
張貼留言
Thank you for your message, we will reply as soon as possible
www.409shop.com.hk